Lock Drop Box Assembly

The drop box is shipped with all the pieces required for assembly. If for any reason you are missing pieces, please email the support team at support@davincilock.com for assistance. Reference the steps and photos below for assembly information.

1. Remove all items needed for assembly from within the drop box.

2. Stick the rod from E into the hole in F and ensure that the holes on the latch are aligned and flush.

3. Once aligned, place the component through the hole on the front of the drop box door.

4. On the back of the drop box door, use D as a bolt to tighten the pieces into place.

5. Place A and B on the thread of E/F, ensuring that the latch, B, is in an upright position, pointing toward the top of the drop box.

6. Use C as a bolt to tighten the pieces into place.